612089
90
Zoom out
Zoom in
Previous page
1/114
Next page
Operating instructions
88 Operating manual 806N Version 00.0 - 12/2012
Possible malfunctions:
Fault Removal/remedial action
Broken thread Thread the needle thread, Section 5.2.4, then continue
sewing, Section 5.8.7
Bobbin is empty Insert a new bobbin, Section 5.2.5, wind thread onto a
bobbin, Section 5.8.1
A sewing program
cannot be selected
- Are the reflector strips on the rear side of the transfer plate
all present and intact? Re-attach if necessary
- Code code on the transfer plate is incompatible, see
Section 5.2.6, change the shape assembly or load a
new program
- Light sensor on the machine is dirty and the code on the
transfer plate cannot be read, clean the light sensor and
perform referencing again
Thread monitor signals
a fault
The needle thread is probably broken, check and re-thread if
necessary, see Section 5.2.4, then continue sewing,
Section 5.8.7
The stacker is not
stacking
Reference to menu 2, is a stacker really activated?,
Section 5.7.7
Pocket blanks are not
folded
Deactivate sewing without edge folding, Section 5.7.2
Machine proceeds for-
wards only step-by-
step
Deactivate Work step by step, Section 5.7.1
Transmission to DAC
failed
Connection to the control system cannot be established.
Deactivate the EMERGENCY STOP devices, otherwise
contact a service technician
Error 3121 Error text: Compressed air pressure too low or not con-
nected; check the compressed air connection and pressure
Error 5302 Error text: Seam program contour data too large;
Select a different seam program or load a new seam pro-
gram
Error 9116 Error text: Unknown pocket form;
Select a different seam program or load a new seam pro-
gram
Error 9170 Error text: No transfer plate;
Fit a compatible transfer plate, Section 5.2.6, then per-
form referencing on the machine anew
Error 9180 No technology point for switching the transfer plate;
Select a different seam program
Error 9221 Error text: Pushbutton pressed too long;
Operator information
Error 9222 Error text: Pushbutton pressed too long;
Operator information
Error 9223 Error text: Pushbutton pressed too long;
Operator information
Error 9224 Error text: Pushbutton pressed too long;
Operator information
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 806N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 806N in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 806N

Durkopp Adler 806N User Manual - German - 114 pages

Durkopp Adler 806N User Manual - French - 114 pages

Durkopp Adler 806N User Manual - Spanish - 114 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info