612089
76
Zoom out
Zoom in
Previous page
1/114
Next page
Operating instructions
74 Operating manual 806N Version 00.0 - 12/2012
5.8 Activities on the machine
This section describes activities that do not relate to the operating soft-
ware. These are mechanical settings performed at specific places in the
machine.
5.8.1 Winding the hook thread
Winding the hook thread is performed during the normal sewing process.
The winding process stops automatically when the bobbin is full.
Figure 48: Winding the hook thread
You wind the hook thread as follows:
1. Press the Stop button to place the machine in the Secure hold sta-
tus.
The secure stop light lights up.
2. Insert an empty bobbin onto the pin below the winding lever (1).
3. Feed the thread from above, downwards through the right hole of the
thread guide.
4. Feed the thread clockwise around the thread tensioner.
5. Feed the thread from below, upwards through the middle hole of the
thread guide.
6. Feed the thread from above, downwards through the left hole of the
thread guide.
7. Manually wind the thread several times clockwise around the bobbin.
The thread is now fastened to the bobbin.
8. Press the winding lever (1) downwards against the bobbin.
The machine can now be used normally and winding takes place
while using the machine. Winding is automatically stopped by the
winding lever when the bobbin is full.
9. When the bobbin is full, cut the thread using the cutting clamp (2) and
remove the bobbin.
(1) - Bobbin lever (2) - Cutting clamp
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 806N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 806N in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 806N

Durkopp Adler 806N User Manual - German - 114 pages

Durkopp Adler 806N User Manual - French - 114 pages

Durkopp Adler 806N User Manual - Spanish - 114 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info