612094
13
Zoom out
Zoom in
Previous page
1/24
Next page
4. PREPARATION AND OPERATION
4.1 LUBRICATION
To avoid malfunction and damage of the machine, confirm the following:
Before you put the machine into operation for the first time after set-up, clean it thoroughly.
Remove all dust gathering during transportation and oil it well.
Confirm that the voiltage has been correctly set.
Confirm that the power plug has been properly connected to the power supply.
Never use the machine in the state where the voitage type is different from the designated one.
r lines when oil gauge 2 is
observed from the side.
(Caution)
Be careful not to supply oil above the upper red
marker line, or else troubles due to excessive
lubrication may result.
Change oil when one month has passed after
the set-up of the sewing machine. Then,
change oil every six months.
Supply oil if the oil surface comes down under
the lower marker line when observing the oil
gauge from the side.
(Caution)
Apply two or three drops of oil to the needle bar
and upper looper guide portion when operating
the machine for the first time after set-up or after
or after a long period of disuse.
Remove oil cap 1 .
Pour DA32 Oil(Order No.9047 000032) into the
oil reservoir.
Supply oil until the oil surface reaches between
thetworedmarke
Caution: Danger of injury!
To protect against possible person injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
2
1
6
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 7700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 7700 in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info