612095
21
Zoom out
Zoom in
Previous page
1/28
Next page
8.4 Changing parameter values
CAUTION!
After changing parameters it is essential to carry out a se-
wing run. Only then is the altered setting properly saved. If
sewing does not take place, the new setting is lost when
the main switch is turned off.
Parameters are changed and switched on and off with the
"P"
,
"E"
,
"+"
and
"-"
keys on
the operating panel.
The parameters which can be changed at operator level are listed below.
1. Switch on mains.
2. Start programming mode
Press the
"P"
key.
The last parameter to have been called appears. If no parameter has been called
since the main switch was turned on,
"F - 000"
appears in the display.
3. Select required parameter
Press the
"+"
or
"-"
key repeatedly until the required parameter appears in the
display. If the
"+"
or
"-"
key is held down, the parameter number automatically
cycles until the key is released.
Pressing the
"E"
key displays the parameter value.
4. Change displayed parameters
Press the
"+"
or
"-"
keys to change the value of the parameter or switch its
function on and off.
5. Save change parameter values
Press the
"E"
key to change further parameter values.
The changed parameter value is saved. The next operator-level parameter
appears in the display.
or:
Press the
"P"
key to leave programming mode.
The last parameter value to have been changed is saved.
The control system leaves programming mode.
Commencing sewing saves the new values, which are thus preserved when the
machine is switched off.
8.5 Direct parameter-number selection
The parameter number can also be selected directly:
When a parameter number is displayed, press the
">>"
key.
The first character flashes.
Move to the next character by pressing the
"+"
or
"-"
keys.
GB
23
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 768 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 768 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 768

Durkopp Adler 768 User Manual - German - 28 pages

Durkopp Adler 768 User Manual - French - 28 pages

Durkopp Adler 768 User Manual - Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info