612112
83
Zoom out
Zoom in
Previous page
1/92
Next page
2.16.11 Working method B with set of parts “Pocket bag on flap”
The set of parts allows the simultaneous attaching of two pocket bag
halves when sewing the piping.
Flap and pocket bag are separated before sewing so that the light
barrier scans the flap length only. This manufacturing method does not
require the subsequent attaching of the pocket bag to the piping
projection. Thus the pocket opening remains flat and
displacement-free.
Order No. Set of parts “Pocket bag on flap” 0745 597874
Standard checking
In the machine parameters the mode “Pocket bag on flap” has to be
set. (See Programming Instructions, chapter 6.2) The lifted left
clamp moves to the loading position 10 mm further to the left.
Adjust the stops according to the Service Instructions chapter 4.4.
Select the mode “Pocket bag on flap” (See Programming
Instructions, chapter 6.2)
In the pocket parameters the parameter “Blowing of pocket
bag/piping” has to be set to mode 5 “Blowing of pocket bag on
flap”. For seleceting the parameter “Blowing of pocket bag/piping”
see Programming Instructions, chapter 5.4.
The stroke of the lifted left feeding clamp must not exceed 15 mm
(standard 20 mm). For adjusting the feeding clamp stroke see
Service Instructions chapter 4.3.
When working with this set of parts the front positioning point must
be used to guarantee that flap and pocket bag are securely
separated when running into the folder.
The rear marking lamp and the rear flap stop have to be set to the
flap length to be sewn.
In order to guarantee a trouble-free sewing process the pocket bag
must lie at least 10 mm in front of the flap. The piping projection
must not exceed 10 mm as well.
83
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 745-34 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 745-34 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 745-34

Durkopp Adler 745-34 User Manual - German - 92 pages

Durkopp Adler 745-34 User Manual - French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info