612677
6
Zoom out
Zoom in
Previous page
1/14
Next page
2.3 Setting the Thread Tension
There are 2 tensions to be set for each needle and bobbin thread at
the tensioning units.
The tension
normal
is always available.
The tension
enhanced
is only switched on in the area of stitch
condensing. This occurs pneumatically through the machine.
Needle thread tension:
1 normal: 70 g
2 enhanced: 120 g
Bobbin thread tension:
3 normal: 15 g
4 enhanced: 40 g
The value for the thread tension
enhanced
is the total tension of the
two individual tensions.
2.4 Changing the Configuration Set
A configuration set corresponding to the desired seam configuration
must be inserted.
Configuration set 0793 078001 = straight seam
Configuration set 0793 078002 = curved seam
Configuration set 0793 078xxx = customer version
Caution Risk of Injury !
Turn main switch off.
The configuration set may only be changed with the machine switched
off.
Removing the configuration set
Turn the handwheel until the needle is in the 2nd position
(OT)
.
Push the configuration set to the left end position.
Turn the grip 5 counterclockwise about 90°.
Lift the configuration set 6 at the left side and carefully detach from
the transport carriage.
Remove the configuration set.
Inserting the configuration set
Turn the handwheel until the needle is in the 2nd position
(OT)
.
Push the transport carriage into the left end position.
Carefully place the right side of the configuration set on the
transport carriage.
Turn grip 5 counterclockwise about 90° and lay the configuration
set completely onto the transport carriage.
Turn grip 5 back.
The configuration set is locked in and seated fast onto the
transport carriage.
Position the press-on cylinder 7 with the guide roller in the control
curve 8.
Push the configuration set to the right hand stop.
8
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 743-121 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 743-121 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 743-121

Durkopp Adler 743-121 User Manual - German - 13 pages

Durkopp Adler 743-121 User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info