612050
21
Zoom out
Zoom in
Previous page
1/30
Next page
4.1 Thread controller spring
Rule and control
The thread controller spring 1 must hold the needle thread under slight
tension from the highest position of the thread lever to the moment the
needle’s eye penetrates the sewing material.
The thread controller spring 1 may only touch on the stop when the
needle has entered the sewing material up to the eye.
Caution: Danger of injury!
Turn off the main switch.
Check and set the thread controller spring only when the sewing
machine is switched off.
Adjustment
Spring travel
Loosen screw 6.
Turnthespringrest3.
When the needle penetrates into the sewing material, the upper
edge of the spring rest 3 must be positioned at the middle 2 of the
thread tension.
Tighten the screw 6 again.
Spring tension
Loosen screw 4.
Set the spring tension by turning the tension pin 5.
Tighten the screw 4 again.
Hint
The settings for the spring path and spring tension apply only for
normal thread thicknesses.
With extremely thick or thin needle threads or sewing materials other
settings may be required.
17
GB
1
2
3
4
5
6
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 69-373 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 69-373 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info