612050
15
Zoom out
Zoom in
Previous page
1/30
Next page
2.4 Setting of the upper feed
2.4.1 Stroke of the upper feed and the material presser foot
Caution: Danger of injury!
Turn off the main switch.
Check and set the stroke of the upper feed and the material presser
foot only when the sewing machine is switched off.
Rule and control
The stroke of material presser foot and upper feed should be equal.
Check the stroke of the upper feed and material presser foot
through turning the handwheel.
In the highest position, both of them should have the same clearance to
the throat plate.
Adjustment
Loosen screw 1.
Turn the upper feed lever 2 on the shaft.
To the rear = increase the stroke of the upper feed foot
To the front = decrease the stroke of the upper feed foot
Tighten the screw 1 again.
Hint
Once the stroke of the upper feed foot is correct, the material presser
foot setting will also be correct.
Both movements are executed by the same cam.
11
GB
1
2
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 69-373 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 69-373 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info