29
4.2 Oil lubrication
To lubricate the sewing machine only use the lubricating oil
DA-10
or an
equivalent oil with the following specifications:
Viscosity at 40° C:10 mm²/s
Ignition point:150° C
DA -10
can be purchased from
DÜRKOPP ADLER AG
retail outlets under the
following part numbers:
250 ml container: 9047 000011
1 litre container: 9047 000012
2 litre container: 9047 000013
5 litre container: 9047 000014
Fig. 31 Fig. 32
Caution: Risk of injury!
Oil can cause skin rashes.
Avoid prolonged contact with your skin.
Wash thoroughly after contact.
CAUTION!
The handling and disposal of mineral oils is subject to legal regulations.
Transfer used oil to an authorised collection point.
Protect the environment.
Take care not to spill any oil.
Maintenance work to be
conducted
Explanation Operating
hours
Lubrication of the machine
head
The sewing machine is equipped with a central oil wick
lubrication. All bearings (apart from the hook) are supplied by the
oil reservoir 3.
– The oil level must not drop below the "MIN" mark 5.
– Fill oil through the hole 4 in the inspection window up to
the "MAX" mark.
40
Hook lubrication
– Swing up sewing machine head.
– Check the oil level through inspection window 2.
– Fill the oil reservoir with oil through plug 1.
– The necessary oil quantity for the correct lubrication of
the hook is factory set by the manufacturer.
8
