613237
35
Zoom out
Zoom in
Previous page
1/134
Next page
Operation
Operating Instructions 650-16 - 01.0 - 06/2014 33
Figure 10: Setting the hook thread tension
Steps
1. Turn back the adjusting screw (3) so far that the tension on
the tensioning spring (2) is completely removed.
2. Bend the braking spring (1) such that half the recommended
hook thread tension value is applied through the braking
spring.
3. Insert the bobbin into the bobbin housing upper section and
thread in the hook thread 5.4 Winding the hook thread,
page 28.
4. Insert the bobbin housing together with the bobbin into the
hook.
5. Hold the free thread end tightly with one hand.
6. Turn the handwheel until the sewing machine performs one
stitch.
7. Pull the hook thread on to the upper side of the needle hole
using the needle thread.
8. Remove the hook thread in the direction of sewing at an angle
of 45°. About half the tension value should be evident.
9. Then tighten the adjusting screw (3) up to the recommended
tension value.
(1) - Braking spring
(2) - Tension spring
(3) - Regulating screw
1
2
3
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 650-16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 650-16 in the language / languages: English as an attachment in your email.

The manual is 16,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 650-16

Durkopp Adler 650-16 User Manual - German - 134 pages

Durkopp Adler 650-16 User Manual - French - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info