Manual Durkopp Adler 580 (page 24 of 70) (English)

613244

Zoom out

Zoom in

1/70

7 Push buttons

By means of the push buttons it is possible to control the clamps and

to start the sewing operation. According to the setting in the service

menu (see service instructions) the function is different.

1. Setting

–

Key 1: The clamps are opened or closed respectively.

–

Key 2: The sewing operation starts when the clamps are closed.

2. Setting

–

Key 1: The clamps are opened or closed respectively.

–

Key 2: If the clamps are not lowered, they will be lowered now. The

sewing operation starts.

8 Setting the fabric stops

Caution: Danger of injury !

Adjust the fabric stops only when the buttonhole automat

is switched off!

–

Place the sewing material until it touches the fabric stops 2 on

both sides (right and left).

–

Loosen the screws 1 on the right and left.

–

Adjust the sewing position by moving the fabric stops 2.

–

Tighten the screws 1 again.

The blade of my botten hole machine has follen what should I do
Submitted on 28-6-2022 at 15:27
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 580 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 580

Durkopp Adler 580 User Manual - German - 70 pages

Durkopp Adler 580 User Manual - French - 70 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Durkopp Adler 580 Manual

Product: