Manual Durkopp Adler 580 (page 13 of 70) (English)

613244

Zoom out

Zoom in

1/70

3.2 Removing and inserting the clamping plates

Caution: Danger of injury !

The removing and inserting of the clamping plates 1 has to be done

with the sewing automat switched off or in the position “Threading

mode” (see chapter “Threading mode”).

Removing the clamping plate

–

Lift the right clamping plate 1 slightly at the rear and pull it to the

back. Then remove the clamping plate to the right side.

–

Lift the left clamping plate 1 slightly at the rear and pull it to the

back. Then remove the clamping plate to the left side.

Inserting the clamping plates

–

Push the clamping plate into its front seat.

–

Then snap it at the rear into the pin 3.

Important note!

Wrongly inserted clamping plates can lead to damage or injuries

The blade of my botten hole machine has follen what should I do
Submitted on 28-6-2022 at 15:27
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 580 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 580

Durkopp Adler 580 User Manual - German - 70 pages

Durkopp Adler 580 User Manual - French - 70 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Durkopp Adler 580 Manual

Product: