613246
20
Zoom out
Zoom in
Previous page
1/24
Next page
6. Sewing
NOTE !
Do not start sewing with the machine before is has been fully
assembled and before, among others, all the protective devices has
been installed.!
6.1 Normal sewing process
Start the sewing process
Turn on the main switch.
If the sewing cage is not lifted, turn the crank until the sewing cage
stands in its rear position ( initial position ). The sewing cage will
be lifted.
Insert the material to be sewn.
Start the sewing process by treading the pedal forwards
( the sewing cage will be lowered, the buttonhole will be sewn, the
knife will act, the threads will be cut off and the sewing cage will be
lifted )
For being able to start a new sewing process, Before the end of
the sewing process, the pedal must be returned to its neutral
position, in order to enable the start of the next sewing cycle.
6.2 Interruption of the sewing cycle
The sewing cycle can be interrupted as follows:
Interruption by the operator
By treading the pedal backwards, the sewing process will be
interrupted within the buttonhole.
The error message
"_1 0 "
will be displayed.
Turn off main switch and eliminate the cause for the interruption.
Interruption by thread breakage
The error message
"_0 1 0 "
will be displayed.
The sewing cage will be moved, without needle thread, up to the
buttonhole end, the knife and the thread cutter will not act and the
sewing cage will not be lifted.
Thread the needle according to chapter 4.1.
Following is to be noted after an interruption
If the sewing cage stands in its initial position ( rear position ), it
can be lifted by treading the pedal backwards.
If the commenced buttonhole is to be completed by a repair seam,
the sewing cage should not stand in its initial position (rear
position) when the main switch is turned on again, because
otherwise it will be lifted.
Before turning on the main switch, take the sewing cage to the
repair point by turning the crank.
If the repair point lies within the second half of the second
buttonhole lip (short before the buttonhole end), a complete
buttonhole will be sewn as a repair seam.
22
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 577 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 577 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 577

Durkopp Adler 577 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info