613246
17
Zoom out
Zoom in
Previous page
1/24
Next page
Key
Key 4
Key A
Key B
( Key B )
Function
Only when the
Programming mode
and
"F - 020"
are set
to
"on"
connect/disconect the knife
( without function )
Direct function:
Only when the parameter adjustment
"F - 195"
corresponds
to
"4"
Short operation:
Reset the hook thread counter ( after bobbin change )
Operation time longer than 1 second:
Connect/disconnect the hook thread counter
Programming mode:
Shift key
( see the Operating Instructions of the motor manufacturer )
Adjustments
on / oFF
5.3 Changing parameter values
NOTE !
It is absolutely necessary to complete a sewing cycle after the
parameter change. It is only then that the modified adjustment will be
definitely memorised. If no sewing is done, the new setting will be lost
by turning off the main switch!
For changing or switching on and off the parameters press the keys
"P"
,
"E"
,
"+"
and
"-"
on the control panel.
The parameters that can be changed on the operator level are stated
in the following parameter list.
Calling up programming mode
Operate the key
"P"
.
The parameter, called up as last one, will appear.. If no parameter
has yet been called up after turning on the main switch, the display
will present
"F - 000"
.
Selecting the desired parameter
Operate the key
"+"
or the key
"-"
.until the desired parameter is
displayed
The parameter value will be displayed after pressing the key
"E"
.
Changing the displayed parameter
For changing the parameter value or for switching on or off the
parameter function press the keys
"+"
or
"-"
.
Memorising the modified parameter value
Press the key
"E"
for changing further parameter values.
The modified parameter value will be memorised. The display will
present the next parameter on the operator level.
or:
Press the key
"P"
in order to quit the programming mode.
The parameter value, modified as last one, will be memorised.
The control system will quit the programming mode.
19
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 577 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 577 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 577

Durkopp Adler 577 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info