613246

Durkopp Adler 577 Manual

13
Zoom out
Zoom in
Previous page
1/24
Next page
–
Insert new knife ( loosen nut
1
) and push it first up to the top.
NOTE !
It is absolutely necessary to note that the distance between the upper
thread scissors and the knife bottom amounts to
at least. 1 mm
.
–
Tighten the nut
1
.
–
Lower the sewing cage by pressing the key
Taste 3
.
–
With the adjustment aid still being engaged, it is now possible to
lower the knife block by operating the
key 4
.
( An arrow will appear above the
key 4
. )
–
Operate the
key 4
once again for lifting the knife block.
The knife block cannot be moved down by the
key 4
as long as the
sewing cage is not lowered. Therefore, first lower the sewing cage by
the
key 3
. Also the function of the
key 3
(lifting the sewing cage) is
locked as long as the knife is in its lower position.
It will be impossible to start the machine as long as the adjustment aid
is engaged.
Adjusting the knife
When the knife block is lowered, the front edge of the knife should
stand
about. 2 mm
under the bottom of the throat plate.
Adjustment:
–
Lift the sewing cage.
–
Loosen slightly the nut
1
.
–
Displace the knife.
–
Tighten the nut
1
.
–
Check the cutting depth and repeat the process, if required.
The cut of the knife should be about 2 tissue threads from the last
sewn final bartack.
Adjustment:
–
Loosen the screw
3
and adjust the distance accordingly.
Note:
When the knife block is in its lowered position, the safety distance
between the front edge of the knife and the slit in the throat plate
insert
must
amount to
0,5 mm
.
–
Tighten the screw
3
.
End the adjustment aid
For ending the adjustment aid press the key
"P"
on the control panel.
15
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 577 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 577 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 577

Durkopp Adler 577 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info