613247
31
Zoom out
Zoom in
Previous page
1/36
Next page
10.6 Sewing
The sewing operation can be controlled either by push button or w ith
the keys OK and ESC at the control panel.
Sew ing w ith the push button
With the push button the clamps can be controlled and the sewing
operation started. According to the adjustment in the service menu
(see service instructions) the function is different.
1. Adjustment (Standard)
Key 1: The clamps are opened or closed respectively.
Key 2: The sewing operation starts when the clamps are closed.
2. Adjustment
Key 1: The clamps are opened or closed respectively.
Key 2: If the clamps are not lowered, they will be lowered now. The
sewing operations starts.
Quick stop while sewing
- Press key 1 or 2. The sewing operation stops.
- Press key 1 for aborting the s ewing operation.
- Press key 2 for continuing the sewing operation.
Sew ing w ith the keys at the control panel
Load the fabric.
Press key OK once. The clamps close.
If you wish to open the clamps again, press k ey ESC ”.
When the sewing operation is to be started, actuate key OK
anew. The buttonhole is sewn.
After the sewing operation the automat moves to the loading
position again.
Quick stop while sewing
-Pressthe“OK”-key or the ESC”-key. The sewing operation stops.
-Pressthe”ESC”-key for aborting the sewing operation.
-Pressthe“OK”-key for continuing the sewing operation.
Sew ing w ith pedal (optional equipment)
The pedal is a two-step pedal without backpedal function.
When pedaling the first step the clamps are closed. The clamps
open again when the first step is released.
When pedaling the second step the sewing operation starts. The
pedal can be released as soon as the sewing operation has
started.
Quick stop while sewing
- Step on the pedal. The sewing operation s tops .
- Step on the pedal once again for aborting the sewing operation.
- The sewing cannot be continued with the pedal! For continuing the
sewing operation you have to use the control panel or the push button.
Taking off the finished w orkpiece
In order to take off the finished workpiece, draw the bottom thread
and the gimp under the thread clamp 2. Pull both threads along the
knife 1 from the right to the left.
The threads are cut.
1
29
12
31


Need help? Post your question in this forum.

Forumrules
1

Forum

durkopp-adler-559

Reset search

  • Comment changer le couroie
    De position de support crocher en bas Submitted on 27-2-2023 at 09:45

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 559 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 559 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 559

Durkopp Adler 559 User Manual - German - 36 pages

Durkopp Adler 559 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info