613247
27
Zoom out
Zoom in
Previous page
1/36
Next page
Menu item Description
143 Eyelet inclination: the buttonhole eye can be slightly inclined to the left or to the right.
150 Throw w idth: the mechanically regulated throw width (stitch width) can
be enlarged up to 1 mm and reduced up to 0.5mm.
160 Cutting adjustments
161 Cutting mode: depending on the sewing equipment, the buttonhole cut can be
set either after sewing (1), before (2), or not at all (0).
0 = no cutting
1 = cutting after s ewing (CA)
2 = cutting before sewing ( CB)
162 Cutting area: the internal distance between the two lips of the buttonhole
is meant by cutting area.
163 Cutting correction in x-direction: the knife position can be displaced to the right/left
within the buttonhole.
164 Cutting correction in y-direction: the knife position can be displaced to the rear/front
within the buttonhole.
165 Correction of cutting pressure: automatic adjustment (4 steps) of the cutting force
of the buttonhole knife depending on the buttonhole length.
-buttonhole length (eyelets) up to 14 mm 2 steps
-buttonhole length from 15 mm to 30 mm 3 steps
-buttonhole length from 31 mm 4 steps
The preset cutting force can be increased/decreased in the above menu item,
depending on the buttonhole length.
170 Taper tack adjustments
171 Ta per tack length: the taper tack length can be set from 2 mm to 36 mm, depending
on the equipment and the buttonhole length.
172 Throw w idth in t he taper tack: the throw width (stitch width) for the whole buttonhole
(see menu item 150) can be reduced in the taper tack.
173 Overlapping in the taper tack: overlapping of the buttonhole seams.
174 Height of the tack slant: the taper length in the tack is adjustable.
180 Cross tack adjustments
181 Cross tack length: the overall length of the cross tack.
182 Stitch length in t he cross tack: distance from stitch to stitch within the cross
tack (from 0,5 mm to 2 mm).
183 Throw w idth in t he cross tack: the mechanically regulated throw width
(stitch width) can be enlarged/reduced.
184 x-position of the cross tack: the whole cross tack can be s hifted to the right/left.
185 Seam extension in the cross tack: the overlapping of the buttonhole seams
with the cross tack is meant by seam extension in the cross tack.
1
25
27


Need help? Post your question in this forum.

Forumrules
1

Forum

durkopp-adler-559

Reset search

  • Comment changer le couroie
    De position de support crocher en bas Submitted on 27-2-2023 at 09:45

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 559 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 559 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 559

Durkopp Adler 559 User Manual - German - 36 pages

Durkopp Adler 559 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info