613248
6
Zoom out
Zoom in
Previous page
1/102
Next page
1.4 Sewing Devices
The devices parts for the different buttonhole forms and cutting lengths are established
under device numbers (E no.s).
After the E no. behind a slash the cutting length or the setting range in mm is given.
Example:
578 E2107 / 20 or 578 E209 / 10 - 38
558 E209 / 10 - 38
For sewing the various buttonhole lengths different cutting blocks, cloth clamps and disc
cams are required. The appropriate order numbers can be found in the device sheet for
the
558
.
The device summary table on the following page lists the currently available devices.
The most suitable device for a specific buttonhole form and a certain type of material
can be chosen quickly from the table.
ATTENTION :
For the
558
after July 1994 the device numbers for the 578 apply ( Chapter 1.4.1 ).
For the
558
up to June 1994 the device numbers for the 558 apply ( Chapter 1.4.2 ).
There are two different groups of buttonhole machines:
Only cutting
after
sewing.
Cutting
before or after
sewing as desired.
For conversion of the buttonhole machine to a further buttonhole form or cutting length
the following points are to be considered:
1. Only those parts are to be ordered and attached whose order numbers do not agree
with those of the device available.
See the device sheets for the 558 and the 578.
2. The cutting lengths can only be selected appropriate to the device or the setting
range.
By devices which have only one digit behind the slash the cutting length is not
adjustable.
3. By machines which are switched over to cutting before or after sewing, the
appropriate sections of these instructions are to be observed.
4. The setting values, buttonhole width and looping stroke, are interdependent and must
be observed when changing to another device (E no.).
If values deviating from the table arise, the adaption is to be made by a specialist as
per the Service Instructions.
8
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 558 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 558 in the language / languages: English as an attachment in your email.

The manual is 6,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 558

Durkopp Adler 558 User Manual - German - 102 pages

Durkopp Adler 558 User Manual - French - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info