Technical specifications software
·
Intuitive user interface
·
Sewing programs with up to 30 seam segments
·
Switching over via strip detection, stitch counting or manually
·
Different setup masks and endlabel masks can be memorized
·
Teach-in function for ETT (electronically controlled needle thread
tension)
·
Test window for the thread tension
·
Display of the thread tension during sewing
·
Recognition of the needle and hook thread via barcode scanning
(if the option is available)
·
Recognition of the material part 1 and / or part 2 (resp. part 3) via
manual scanning
·
Alle seam sections can be defined with various parameters
·
The following parameters are automatically suppressed in the
rupture seam segment
·
RS function (bartacking via step motor)
·
HP function (pneumatic stroke adjustment)
·
FA function (thread trimmer)
·
Optical indicator “tearing seam” in the visual field of the operator
(LED - red)
·
Evaluation of the collected material data
·
Monitoring and active adjustment of the needle tread tension (only
ETT (electronically controlled needle thread tension))
·
Automatic thread breakage recognition
·
Deviations from the nominal values during a seam are recognized
and lead to a sewing stop
·
The sewing process can be stopped in the segment of the lateral
airbag by the seamstress.
In order to do this the “FA” button has to be pressed and
additionally the foot pedal has to be pushed into position 2.
The message “not O.K.” will be automatically issued for this seat.
·
After completing the last seam section all sewing parameters will
be memorized and the request to scan the next material bar codes
appears
·
Data entry in a data base or in a ASCII file
·
Different levels authorized for operators, supervisors and
production manager
·
Data backup also during power outage via UPS (Uninterruptible
power supply)
6
