613255
15
Zoom out
Zoom in
Previous page
1/26
Next page
4.12 Stroke Height of the Sewing Foot during Lifting
The stroke height of the sewing foot during lifting can be limited by the
knurled nut 1 (max. 3 mm).
Loosen the lock nut 2.
Increase the stroke of the sewing foot
= Turn the knurled nut 1 counterclockwise.
Decrease the stroke of the sewing foot
= Turn the knurled nut clockwise.
ATTENTION !
The stroke height of the sewing foot should not be so high that the
needle bar strikes on the foot when the machine turns.
4.13 Pulsating sewing foot
In order to facilitate the rolling of the material in the arc, the sewing
foot will be lifted with the needle frequency synchronously. The height
could be adjusted using the setting wheel 3.
Position 0 on the setting wheel 3 ® no stroke of the sewing foot.
Position 10 on the setting wheel 3 ® maximum stroke.
ATTENTION
Thinner Material ® lesser stroke.
Thicker Material ® greater stroke.
Normal Material ® position between 2 and 4 on the setting wheel.
Basic settings
Position the needle at the lower reversal point.
Turn the setting wheel 3 in a way that the figure 2 is turned towards
the operator.
Loose the Allen screw 5 and turn the disc 4 to the right until the
sewing foot slightly lifts.
Tighten the Allen screw 5.
17
1
543
21
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 550-16-23 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 550-16-23 in the language / languages: English as an attachment in your email.

The manual is 3,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 550-16-23

Durkopp Adler 550-16-23 User Manual - German - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info