613258

Durkopp Adler 550-12-26 Manual

2
Zoom out
Zoom in
Previous page
1/23
Next page
1. Product Description
1.1 Brief Description
The
550-12-23; -24
and
-12-26
are configured work stations for the
precrimping of upholstery pieces.
The work stations are equipped with a single-needle double locked
stitch machine with a differential drop feed (two independently-
adjustable feed dogs) and a differentiable, alternating top feed.
Via a keypad strip 15 different crimping values and 16 intermediate
values can be selected. A knee switch turns them on and off again. In
order to achieve a securer drawing of the stitches a second needle
thread tension is switched on when a crimping value is turned on. The
moment of switching on a second needle thread tension can be
preselected between crimping values 1 and 5 inclusive.
Drive and control of the work station occurs via a 3 phase motor in
conjunction with a Microcontrol control.
To increase the crimping intensity the work station is equipped with an
upper and /or lower tape feed and tensioning. The fixing tape width is
2,25 mm by the sub-classes 550-12-13; -12-14 and 3 mm by the
sub-class 550-12-16.
The tape tension can be turned on via a key and turned off through the
knee switch when the crimping value is switched off.
1.2 Proper Use
The
550-12-23; -24
and
-26
is a configured sewing station which can
be used for sewing light to medium heavy sewing material.
Such material is, as a rule, fabric composed of textile fibers or leather.
These sewing materials are used in the garment, furniture and car
upholstery industries.
Furthermore, it may be possible to also execute so-called technical
seams with this special sewing machine. Here, however, the operator
(DürkoppAdler AG would be applications are, on the one hand,
relatively rare and, on the other, their variety is immense. Depending
on the results of this evaluation it may be necessary to adopt
appropriate safety measures.
In general, only dry material may be worked with this special machine.
The material may not be thicker than 10 mm when it is pressed
together by the lowered unit could only be allowed to be operated with
eye protection. Such eye protection is not available at this time.
The seam is generally made with sewing yarns of textile fibers with
dimensions up to 15/3 NeB (cotton threads), 20/3 Nm (synthetic
threads) or 25/4 Nm (core spun threads). Those wishing to use other
threads must also first evaluate the dangers arising herefrom and, if
necassary, take safety measures.
This special sewing machine may only be ainstalled and operated in
dry and clean areas. If the sewing unit is employed in other areas,
which are not dry and clean, other, to be agreed upon, measures may
become necessary (see EN 60204-3-1: 1990).
We, as a manufacturer of industrial sewing machines, as that, at a
minimum, semi-skilled operating personel work on our products so that
all normal operations and, where applicable, their dangers can be
presumed to be known.
5
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 550-12-26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 550-12-26 in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 550-12-26

Durkopp Adler 550-12-26 User Manual - German - 23 pages

Durkopp Adler 550-12-26 User Manual - French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info