613272
41
Zoom out
Zoom in
Previous page
1/48
Next page
7. Sewing procedure
7.1 Normal sewing procedure
Sw itching on of the automat
Check on the maintenance unit that an air pressure of 6 bar is
present.
Switch on the main switch of the automat.
The machine software will be loaded.
The needle goes to the reference position.
The sewing basket goes to the reference position and raises.
The automat is ready to sew.
Sew ing
Position material to be sewn under the raised sewing basket.
Press the foot pedal forward to position 1. The sewing basket
descends. Releasing the pedal causes the sewing basket to raise
again.
Push the pedal forward to position 2. The sewing procedure will begin.
After the sewing procedure the automat goes to the reference
position and the sewing basket is lifted.
The sewn material can be removed.
7.2 Interruption of sewing procedure
7.2.1 Interruption by the operator
Interruption by the operator
Push the pedal backwards.
The machine stops and the needle is driven up high, the sewing basket
stays down.
When the material has to be removed:
Push the pedal backwards again, the automat goes to the
reference position and the sewing basket is lifted.
When the sew ing procedure is to be started again
Push pedal forwards to position 2.
If during the interruption the handwheel has been turned, a
continuation is no more
possible.
7.2.2 Clearing thread breakage
Thread monitoring
A thread breakage in the upper thread is detected by an electronic
upper thread monitor.
Thread breakage
The automat stops after a thread breakage has been detected by
the upper thread monitor. The knife is switched off, the needle is
driven up high, the sewing basket stays down and goes with the
material to the basket reference position.
The message thread breakage is displayed.
The automat now has to be turned off.
39
1
0
1
2
0
R
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 540-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 540-100 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 540-100

Durkopp Adler 540-100 User Manual - German - 48 pages

Durkopp Adler 540-100 User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info