613276
86
Zoom out
Zoom in
Previous page
1/98
Next page
Error Description Possible causes Troubleshooting
code
5804 Free Contours:
Wrong checksum
-
NV-SRAM faulty
-
Failure
- Check via Multitest,
check the control
- Switch the sewing machine off
and on again
Data will be reset to factory setting.
5808 Error free seam
contour
Cannot determine the
stitch number
Internal error
- Switch the sewing machine off
and on again
- Software update
- Contact the DA-Service staff
5809 Free contours:
Max. number of
contour parts
Max. number of contour
parts (intermediate cut)
exceeded
Delete some intermediate cut in the
free contours
5810 Free contours:
Min. number of stitches
per contour part
Cannot keep the min. number
of stitches per contour part
Move some intermediate cut in the
free contours
5900 Error sequences -
Invalid sequence
number
Internal error
· Switch machine off and on again
· Software update
· Contact the DA-Service staff
6151
-
6154
Error input / output Internal error
· Switch machine off and on again
6351
-
6354
Error I²C Control faulty
Replace control
Software update
Contact the DA-Service staff
6551
-
6554
6651
-
6653
6751
-
6761
6952
Error
Machine head
position /
AD-Converter /
Processorerror/
Error step motor
driver
Internal error
· Switch machine off and on again
· Software update
· Contact the DA-Service staff
7451
7453
7454
Communication Test
interface
Internal error
Switch machine off and on again
7452
7455
Communication
test interface
· Transmission failure
· Cable of test interface faulty
· Internal error
- Switch off the source of
interference
- Replace cable
- Switch machine off and on again
7551
-
7555
7558
7559
Communication
control panel interface
Internal error
- Switch off the source of
interference
- Replace cable
- Switch machine off and on again
7556
7557
Communication
control panel interface
· Transmission failure
· Cable of control panel
interface faulty
- Switch off the source of
interference
- Replace cable
- Switch machine off and on again
7700 Protocol: Max number
of repetition
· Transmission failure
· Cable of test interface faulty
- Switch off the source of
interference
- Replace cable
84
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 530 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 530 in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 530

Durkopp Adler 530 User Manual - German - 98 pages

Durkopp Adler 530 User Manual - French - 98 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info