613279
28
Zoom out
Zoom in
Previous page
1/51
Next page
26
The automatic function pre-selections are described in the drive
manufacturer s accompanying Instruction for Use.
For Efka DA321G motor also see the drive manufacturer s Instruction
for Use on website www.efka.net. Certain automatic functions can be
pre-selected by means of keys. Their description is included in the
publication Efka Instructions for Use.
Further automatic functions can be pre-selected through the drive
parameter change. Every such function has its parameter number.
For the parameter number also the parameter value can be
pre-selected.
The parameter change is described in the publication Efka Instructions
for Use.
List of operator level parameters is included in the publication Efka
Parameter List.
Detailed information for DAC motor are included in “DAC eco/classic
operating manual” delivered to the machine
(also see w w w. duerkopp-adler.com).
9.2 Example of machine control at sewing
Pedvolba:
·
needle down at machine seam-stop
·
standard bars
·
initial double bar
·
end double bar
·
thread trimming on
·
foot lowered at seam-stop
·
foot lifted at seam finishing
Operator s operation Machine work
Machine is at standstill. Needle is in upper position. Foot is lifted in
accordance with pre-selection.
Sewn material inserting.
Pedal treading to position +1. Foot lowering.
Pedal releasing to position 0. Foot lifting.
Material position correcting.
Pedal treading to position +1. Foot lowering.
Pedal treading to position +3. Sewing of standard double bar (at the speed which was pre-selected by the
manufacturer) and subsequent sewing at the speed corresponding with
speed gear +3.
Pedal releasing to position 0. Machine stopping with needle down.
Pedal treading to position -1. Foot lifting.
Material turning on needle.
Pedal treading to position +5. Foot lowering and subsequent machine start up at the speed of 5th sewing
speed gear.
Pedal treading to position -2. Speed reducing. Sewing of standard double bar. Thread trimming under
throat plate and machine stop with needle up. Foot lifting.
Pedal releasing. (Foot will remain lifted).
Sewn material removing.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 52Xi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 52Xi in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 52Xi

Durkopp Adler 52Xi User Manual - German - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info