Manual Durkopp Adler 528 (page 13 of 34) (English)

613277

Zoom out

Zoom in

1/34

Foot position adjustment by stopping at the seam (by neutral

position of treadle) and after finishing seam (by neutral posi-

tion of treadle):

Setting is by means of pushbutton 3, arrow indication above

the corresponding symbol.

Needle position adjustment by stopping at the seam:

Setting is by means of pushbutton 4.

8.2.1.2 Setting by means of parameters (Fig. 16)

Drive memory contains the parameters which enables sewing

system tuning. These parameters have exact meaning and

they are divided into 3 levels. Further parameters which are

available only for operation will be quoted. Each parameter

has its (sequence) number and value.

General procedure by changing parameters of operation level:

- switch the main switch on or finish the seam by pressing the

treadle fully backwards down

- press pushbutton P on the panel V 810

- it will be displayed on the display F 000 (000 it is the number

of parameter)

- by several times pressing + (or -) set the requested number

of parameter

- push pushbutton E down and it will be shown the value of

parameter on the display

- you can change the value by means of pushbutton + or –

- by pushing pushbutton E down you will change the sequence

to the following number of parameter

- by pushing pushbutton P down you will leave the mode of

changing parameters

Note: 1. For permanent memory storing of changed pa-

rameter, it is necessary to press treadle forwards

down after changing of parameters.

2. Mode of changing parameters is possible only af-

ter finishing of the seam.

Number of stitches in bars:

Number of stitches is stored in parameter’s number.

No. of parameter Value range Description

of parameter of parameters

000(080) 0-254

Number of stitches of

start (fancy) bar forwards

001(081) 0-254

Number of stitches of

start (fancy)bar backwards

002(082) 0-254

Number of stitches of

end (fancy) bar backwards

003(083) 0-254

Number of stitches of

end (fancy)bar forwards

Sewing according to sewing program:

Drive with panel V810 automatically enables sewing of 1 seam

with setting number of stitches. It is necessary to set in corre-

sponding number of stitches, and initialisation of sewing pro-

gram.

No. of parameter Value range Description

of parameter of parameters

007 0-254 Number of stitches

015 ON/OFF

ON/OFF sewing under

sewing program

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 528 in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 528

Durkopp Adler 528 User Manual - German - 34 pages

Durkopp Adler 528 User Manual - French - 34 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Durkopp Adler 528 Manual

Product: