613285
5
Zoom out
Zoom in
Previous page
1/34
Next page
1
Part A - Instruction manual
1. Proper use of the machine
The machine is destined for sewing on under collars into neck openings of jackets, for sewing on top collars on falls of under
collars, for sewing on lining collars into the top parts of trousers, for sewing on pocket facings on trouser bags, for overedging
of edges and similar operations in making-up outerwear, for sewing materials of wool, cotton and materials with admixture of
synthetic fibres and woven fabrics of 100 % polyamide fibres. In general, only dry material may be sewn on these machines,
which should not be thicker than 4 mm when being compressed by the presser foot. The material should not contain any hard
objects, because in such opposite case the sewing operation would be possible only with an eye protector. Such eye protector
is not supplied for the time being. When sewing very hard or compact materials with a thicker needle, the total thickness thereof
is limited. In such case it is also necessary to reduce substantially the sewing speed below the value quoted in the par. 5. These
machines may be installed and operated only in dry and maintained rooms.
As manufacturers of industrial sewing machines we start from the supposition that our machines will be operated at least by a
trained staff, so that all usual operating activities and their eventual risks may be supposed to be known.
Machine noisiness
The noisiness of machines is measured according to ISO 3746, ISO 11204 at the maximum sewing speed.
Laeq = equivalent noise level of the machine itself on the working place converted in % of the machine utilization (dB) – is given
in the following table
2. Description of the machine
It is flat-bed single-needle machine. It sews with double-thread zigzag lock-stitch, with two-way drop feed. The stitch length is
adjustable using a knob. The backward stitching is controlled by a hand lever, eventually, by pedal or by electromagnet in
accordance with the equipment of the machine. The position and the width of the zig-zag stitch are adjustable by levers situated
on the machine arm. The presser foot lifting is controlled by a hand lever, eventually, by pedal, or by a knee lever or by electromagnet
in accordance with the machine equipment.
The machine is provided with a large diameter horizontal hook. It has a 1.8 x greater reserve (volume) of threads than a standard
hook. The lubricating system of the machine is of a group wick-feed type with automatic regreasing of the hook.
3. Machine subclasses
Table 1
4. Survey of equipment
This survey does not include the equipment assembled on the stand (see part B).
4.1 -for the subclass -101
4.1.1 Necessary equipment
S791 995068 Parts of backtacking (with pedal)
4.1.2 Sewing equipment
S791 124032 35 Sewing equipment 525 E 032
S791 124033 35 Sewing equipment 525 E 033 - standard
S791 124034 35 Sewing equipment 525 E 034
S791 224075 35 Sewing equipment 525 E 075
Type of the Noisiness % machine
machine dB employment
524-101 83 20
524-105 83 20
Machine type Hook Presser foot lifting Backtacking Thread
trimmer
Class-subclass Large Via knee lever Via electro- Via hand Via Via electro-
or pedal magnet lever pedal magnet
524-101
524-105
optional equipment
standard equipment
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 524 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 524 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 524

Durkopp Adler 524 User Manual - German - 34 pages

Durkopp Adler 524 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info