613273
55
Zoom out
Zoom in
Previous page
1/92
Next page
Settings via the software
Operating Manual 512/532 Version 01.0 - 07/2015 53
5. Use the +/– Function buttons to set the coordinates of the
1
st
stitch for the Y axis.
6. Use the +/– Program buttons to select the next stitch.
7. Repeat steps 3 to 5 for all further stitches.
8. Press the Ready button to save the edited seam appearance.
9. Press the Reset button.
The button LED goes out.
10. Press the USB button.
The button LED goes out.
5.23Error messages
If an error occurs, the Error symbol LED illuminates.
Error message Description Possible cause Remedy
E 8 Table data error Table data could not be read Save the table data anew.
E10Seam
appearance
number error
The selected seam
appearance is not stored in
ROM or has been disabled.
Seam appearance “0”
Press the Reset button to
confirm the seam
appearance number.
E 3 0 Needle bar
position raised
error
Needle bar is not in the
upper position
Check the connections.
Rotate the needle bar to
the upper dead point.
E 4 0 Needle field
area error
Needle field area error
exceeded
Press the Reset button.
Check the X/Y scaling.
E 4 2 Enlargement
error
Sewing length is beyond
10 mm
Press the Reset button.
Check the seam
appearance and the X/Y
scaling.
E45Seam
appearance
data error
Seam appearance data
could not be accepted
Press the Reset button.
Check the ROM.
E 5 0 Pause Reset button pressed while
sewing.
Sewing machine stopped.
Press the Reset button.
Trigger the thread cutter.
Start the sewing process
anew.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 512 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 512 in the language / languages: English as an attachment in your email.

The manual is 11,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 512

Durkopp Adler 512 User Manual - German - 92 pages

Durkopp Adler 512 User Manual - French - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info