613273
24
Zoom out
Zoom in
Previous page
1/92
Next page
Operation
Operating Manual 512/532 Version 01.0 - 07/201522
4.2 Setting the needle thread tension
Figure 2: Setting the needle thread tension
Preliminary tension of the needle thread
With an open primary tensioner (2) a small amount of residual
tension of the needle thread is required. The residual tension is
generated by the preliminary tensioner (1).
The preliminary tension also affects the length of the cut needle
thread end (starting thread for the next seam).
1. Turn the preliminary tensioner (1) clockwise (– direction) for
a shorter starting thread.
2. Turn the preliminary tensioner (1) counterclockwise
(+ direction) for a longer starting thread.
Primary tension of the needle thread
1. Set the primary tension of the needle thread (2) to be as low
as possible.
The thread interlacing should be exactly in the middle of the
material being sewn. With thin sewn material, excessive thread
tension can lead to undesired ruffing and thread breakages.
(1) – Preliminary tensioner (2) – Primary tensioner
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 512 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 512 in the language / languages: English as an attachment in your email.

The manual is 11,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 512

Durkopp Adler 512 User Manual - German - 92 pages

Durkopp Adler 512 User Manual - French - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info