613289
8
Zoom out
Zoom in
Previous page
1/24
Next page
1.2 Short Description
Uniform Quality
The unit always produces a uniform seam formation.
The high thread tension necessary for the working of heavy materials is
achieved through a hinged thread lever.
Direct Pow er Transmission
The power transmission from the motor to the arm shaft occurs via a
special V-belt. This results in a particularly strong perforating power for
the sewing of thick materials or multiple layers.
Interchangeable Curve Disks and Material Clamps
The different seam formations are determined by easily
interchangeable curve disks.
The material guidance occurs via a pattern curve with two guide curves.
The difficult and time-consuming turning of heavy pieces of material by
the seamstress is thus unnecessary.
The transmission of the movement to the material clamps occurs via
lever systems.
By changing the lever multiplication the seam formation s izes can be
varied within certain limits.
All curve disks belonging to a stitch number range are interchangeable
among each other.
Large Put-through Area and Large Placement Surface
The large put-through area allows the making of s hort seams far from
the edge of the material. A rolling-in of flexible sewing material is
possible. The closed width base plate offers a large placement surface
and simplifies the feed.
Pneumatic Clamp Opening
The stroke of the holder clamp is a maximum 20 mm. This stroke allows
the working of almost all sewable materials and leather thicknesses.
Electric Thread Burning Device
The thread separator device separates the needle and underthread by
burning immediately at the top edge of the material. The synthetic
threads are melted together at the ends. The thus created hardening
hinders a loosening of the seam and a unthreading of the needle thread.
Control Unit Quick DA104ED
The complete control of the sewing unit occurs via a Quick control unit.
It assumes the control tasks, monitors the sewing process and
indicates operator errors and malfunctions.
ATTENTION!
These operating instructions give the key functions and describe how
operator-level parameter values are changed by the operator.
For a detailed description of the control unit, please consult the enclosed
current issue of the operating manual of the motor manufacturer.
6
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 506-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 506-3 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 506-3

Durkopp Adler 506-3 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info