634055
29
Zoom out
Zoom in
Previous page
1/32
Next page
Maintenance work Remarks Operating
to be conducted hours
Machine head
- Remove sewing dust,
thread and cutting residue.
- Clean the oil baffle
(under the machine head).
Areas to be particularly cleaned:
- Underside of the needle plate
- Feed dog ridges
- Area around the hook
- Bobbin case
- Thread trimmer
- Area around the needles
- Remove sewing dust and cutting residue
8
40
Sewing drive
- Check condition and
tension of the V-belt.
The V-belt 1 must be able to be pressed
in approx. 10 mm with a finger at the
center.
160
Pneumatic system
- Check the water level in
the pressure regulator.
- Clean the filter insert.
The water level should not rise up to the
filter insert 1.
- Blow water out of the water separator 2
under pressure after screwing in the
drain screw 3.
Note:
The water separator 2 is equipped with
a semiautomatic condensation drain.
After exceeding a specific pressure, the
condensation is drained automatically.
Dirt and condensation are removed
through filter insert 1.
- Separate the sewing unit from the
compressed air supply.
- Screw in drain screw 3.
The pneumatic system of the sewing
unit must be pressure-free.
- Screw off the water separator 2.
- Remove the filter insert 1.
Wash out the dirty filter bowl and filter
insert with naphtha (
no solvents!
)
and blow clean.
- Reassemble andconnect the
maintenance unit.
40
500
31
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 382 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 382 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 382

Durkopp Adler 382 User Manual - German - 32 pages

Durkopp Adler 382 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info