634055
26
Zoom out
Zoom in
Previous page
1/32
Next page
8. Sewing
The description of sewing assumes the following preconditions:
The following functions are set at the control panel:
Beginning bartack: ON End bartack: ON
Sewing foot position before and after trimming: LOW
Needle position before trimming: LOW (position 1)
Main switch turned on.
The last sewing procedure was completed with end bartack and thread trimming.
Operation and function sequence during sewing:
Sewing procedure Operation / Remarks
Before the sewing start
Initial position
Position the material at the
seam beginning
- Pedal in rest position.
Sewing machine is idle.
Needle up. Sewing feet down.
- Step back on the pedal.
The sewing feet rise.
- Position the material.
- Release the pedal.
The sewing feet lower onto the material.
At the seam beginning
Beginning bartack and
continue sewing
Beginning bartack is
not
to be
sewn
- Step forward on the pedal and hold down.
The beginning bartack is sewn.
Subsequently the machine continues
sewing at the speed determined with the pedal.
- Press key 3 (bartack suppression).
- Step forward on the pedal.
- The machine sews at the speed determined
with the pedal.
1234
28
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 382 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 382 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 382

Durkopp Adler 382 User Manual - German - 32 pages

Durkopp Adler 382 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info