634055
14
Zoom out
Zoom in
Previous page
1/32
Next page
6.8 Inserting and Changing Needles
Caution Risk of Injury !
Turn the main switch off.
Change needles only with the sewing machine turned off.
Bring the needle bars into the high position.
Loosen screws 1 (right or left, 1.5 Allan key in the accessories pack).
Remove the needles from the needle holder.
Insert new needles up to the stop in the holes of the needle holder.
ATTENTION !
Seen from the operator side, the furrow of the left needle
must face to the left and the furrow of the right needle to the
right.
Tighten screws 1 (right or left).
ATTENTION !
The factory-set clearance of the hook to the needle is only
correct for needles with a thickness of Nm 80 to 100. When
inserting a thinner or thicker needle, the clearance must be
corrected (see Service Instructions).
Non-observance of the above correction can lead to the following errors:
When inserting thinner needles: - Missing stitches
- Damage to the thread
When inserting thicker needles: - Damage to the hook point
- Damage to the needle
1
1
16
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 382 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 382 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 382

Durkopp Adler 382 User Manual - German - 32 pages

Durkopp Adler 382 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info