634054
27
Zoom out
Zoom in
Previous page
1/32
Next page
Sewing procedure Operation / Remarks
In the seam middle
Interrupting the sewing
procedure
Continuing the sewing
procedure
(after release of the pedal)
Sewing a corner
Sewing an intermediate bartack
- Release the pedal (rest position) .
The machine stops in the first position
(needle down).
The sewing feet are down.
- Step forward on the pedal.
The machine sews at the speed determined
with the pedal.
The beginning bartack is
not
sewn.
- Release the pedal.
The machine stops in the first position
(needle down).
The sewing feet are down.
- Turn the needle bar right or left off.
- Conduct the required stitches with the second
needle bar.
- Step half back on the pedal
- Turn the material around the needle.
Only
one
needle may be in the material.
- The sewing feet lower.
Sew the necessary stitchs.
- Turn the needle bar on again.
- Press key 2 and hold the pedal down.
The machine sews in reverse as long as key 2
is pressed.
The speed is determined by the pedal.
At the seam end
Removing the material
End bartack is
not
to be sewn
- Step the pedal completely back and hold down.
The end bartack is sewn.
The thread is trimmed.
The machine stops in the second position.
The sewing feet are raised.
- Press key 3 (bartack suppression).
Step the pedal completely back.
The end bartack is
not
sewn.
The thread is trimmed.
The machine stops in the second position.
The position of the sewing feet is
dependent on press key 6 on the control panel:
a) ON:
- Sewing feet raised.
b) OFF:
- Sewing feet down.
29
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 381 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 381 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 381

Durkopp Adler 381 User Manual - German - 32 pages

Durkopp Adler 381 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info