633974
29
Zoom out
Zoom in
Previous page
1/39
Next page
7.5 Status and error messages on the V810 and V820 operating panels
General information
V810 V820 Meaning
InF A1 InFo A1 The pedal is not in its z ero position w hen the
sewing drive is switched on
StoP symbol “G”
flashes “cut-out”
flashes
The cut-out is active
InF A3 InFo A3 Reference position not stored.
For programming see set-up instructions.
InF A5 InFo A5 No valid Autoselect resistance
detected. For information see set-up
instructions
Programming error message
V810 V820 meaning
If InFo F1
jumps back
to 1st digit
Incorrect code or parameter number
entered
Hardw are and softw are error messages
V810 V820 meaning
InF E1 InFo E1
After main sw itch on:
proximity or commutation switch
defective or connection lead wrongly connected.
During or after a sew ing run:
proximity switch defective.
InF E2 InFo E2 Mains voltage too low or the time between
main switch OFF and main switch ON was
too short.
InF E3 InFo E3 Machine is blocked or not reaching the
required rotation speed
InF E4 InFo E4 Control disrupted by defective earthing
or defective plug connections
(contact error).
InF H1 InFo H1 Commutation-switch lead is defective or
the power electronics for the generation of the
rotating field is faulty.
InF H2 InFo H2 Processor faulty.
30
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 367 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 367 in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 367

Durkopp Adler 367 User Manual - German - 39 pages

Durkopp Adler 367 User Manual - Dutch - 39 pages

Durkopp Adler 367 User Manual - French - 39 pages

Durkopp Adler 367 User Manual - Spanish - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info