634046
60
Zoom out
Zoom in
Previous page
1/74
Next page
Set-up
Operating manual 281 - 02.0 - 03/201658
7.7.2 Fit the pedal and setpoint device
Figure 35: Fitting the setpoint device
1. Fit the pedal (5) onto the cross strut (6) and align it in such a
way that the middle of the pedal is under the needle. The cross
strut has elongated holes to allow alignment of the pedal.
2. Screw the pedal (5) firmly onto the cross strut (6).
3. Screw the setpoint device (2) onto the angle piece (1).
4. Screw the angle piece (1) under the table plate so that the
pedal rod (4) runs vertically to the pedal (5) from the setpoint
device (2).
5. Hang the pedal rod (4) with the ball socket on the setpoint
device (2) and attach to the pedal (5).
6. Pull the pedal rod (4) to the correct length:
Correct setting: 10° inclination with pedal (5) released
7. Tighten the screw (3).
(1) - Angle piece
(2) - Setpoint device
(3) - Screw
(4) - Pedal rod
(5) - Pedal
(6) - Cross strut
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 281 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 281 in the language / languages: English as an attachment in your email.

The manual is 9,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 281

Durkopp Adler 281 User Manual - German - 74 pages

Durkopp Adler 281 User Manual - French - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info