634043
15
Zoom out
Zoom in
Previous page
1/18
Next page
3.5 Regulating the Needle Thread Tension
Pre-tensioning for Thread Trimming
For the sure functioning of the thread trimming with
opened main tension 4 a small residual tension of the
needle thread is required.
This residual tension is achieved by pre-tensioning 3. At
the same time it influences the length of the cut needle
thread end. (Starting thread for the next seam.)
Short starting thread = tighten the knurled nut 3.
As base position applies:
Front of the knurled nut and bolt flush.
Greater adjustments of the pre-tensioning makes a
readjustment of the main tension necessary.
Main tension
Pre-tensioning 3 and main tension 4 should give the
recommended needle thread tension of e.g. 80g.
Set the main tension 4 accordingly.
3.6 Thread Regulator
With the thread regulator 6 the needle thread quantity
required for stitch building can be regulated. The setting
is dependent on stitch length, material thickness and
thread characteristics.
Note:
Only a precisely set thread regulator assures an optimal
sewing result.
The needle thread loop should glide over the hook
without excess and with little tension.
Loosen screw 9 and set the regulator accordingly.
The vertical wire 7 serves as a setting aid in conjunction
with the scale 8.
45
987
6
17
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 273 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 273 in the language / languages: English as an attachment in your email.

The manual is 2,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 273

Durkopp Adler 273 User Manual - German - 18 pages

Durkopp Adler 273 User Manual - Dutch - 18 pages

Durkopp Adler 273 User Manual - French - 18 pages

Durkopp Adler 273 User Manual - Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info