634042
10
Zoom out
Zoom in
Previous page
1/18
Next page
2.2. Elements on the Frame
Elements Function
1Main Switch Turn the sewing drive on and off.
The sewing machine head is operational.
Attention!
For threading, replacement of sewing tools (such as
needle, pressure foot, needle plate, material feed etc.),
cleaning, when leaving the work place as well as during
maintenance work it is essential to turn the main switch
off.
See also General Safety Notes.
2Pedal
A
Rest position. No function.
B
Raise pressure foot during machine rest
C
Sewing to a maximum number of stitches by
appropriate step down.
D
Seam bartacking* - Thread cutting - Raise
pressure foot*
*Not with sub-classes -....41
Maintenance unit
6Air filter and
7Water seperator
Before the water level reaches the air filter 6 screw
in screw 8 and relaese the water under pressure.
4Pressure regulator For setting the air pressure at 6 bar pull up and
adjust the knob 4.
Turn to the right = Pressure increase
Turn to the left = Pressure decrease
9Oil Mister The oil mister provides the solenoid valves and
cylinders with lubricating oil .
With the regulating screw 11 set at approx. 1 drop of
oil for 15 work cycles.
To fill the mister 9 turn off the compressed air. Do
this by pulling up the knob 4 and turning to the left.
Screw out screw 10 and fill Esso SP - NK 10 oil up to
the grooved marking of the oil reservoir.
12
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 272 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 272 in the language / languages: English as an attachment in your email.

The manual is 2,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 272

Durkopp Adler 272 User Manual - German - 18 pages

Durkopp Adler 272 User Manual - Dutch - 18 pages

Durkopp Adler 272 User Manual - French - 18 pages

Durkopp Adler 272 User Manual - Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info