634042
6
Zoom out
Zoom in
Previous page
1/18
Next page
2. Machine Elements and their Functions
2.1 Elements on the Machine Head
Element Function
1Screw Regulating of the pressure foot pressure. The
Setting of the screw is to be fixed.
2Hand lever Turning the edge cutter 10 on and off. The position
of the hand lever is variablly adjustable.
3Spooling device See under Section 3.2 Spooling of the Bobbin
Thread.
4Control panel See the motor manufacturer’s instructions.
5Oil reservoir The oil level should not be allowed to drop below
"MIN". When necessary fill with ESSO SP-NK10 oil
to "MAX".
6Adjustment wheel Setting the stitch length for reverse sewing (with
sub-classes -....41 via hand lever).
7Adjustment wheel Setting the stitch length for forwardsewing (with
sub-classes -....41 via hand lever).
8Rest For tilting the machine head to the back (not on
classes 273 and 274).
9Needle thread tension Turn in direction + = higher needle thread tension
Turn in direction - = looser needle thread tension
10Edge cutter Function see following page.
11Needle System 134, 797 or Sy 1955-01
- Risk of Injury! -
Before replacing the needle it is essential to turn the main
switch off.
12Locking button Lock the pressure foot in the raised position
13Hand lever Setting the carrier roller up. It is swung out of the
work area. Sewing only with bottom feed
14Adjustment wheel Transport length for the top feed roller
15Roller top feed Function see following page
8
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 272 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 272 in the language / languages: English as an attachment in your email.

The manual is 2,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 272

Durkopp Adler 272 User Manual - German - 18 pages

Durkopp Adler 272 User Manual - Dutch - 18 pages

Durkopp Adler 272 User Manual - French - 18 pages

Durkopp Adler 272 User Manual - Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info