633970
19
Zoom out
Zoom in
Previous page
1/28
Next page
17
夹线器
3.3
3.3.1
调节夹线器 5
规则
1
通常只有通过调节针线夹紧件才能获得正常张紧针迹的好线迹, 主要通过调节针线主夹线器 H
说明
1
调节针线夹线器时,首先松开针线预紧夹线器 K仅调节针线主夹线器 H 直至梭线和针线交织在缝料中,
5.
应最后调节针线预张紧夹线器, 因为针线预张紧力始终小于针线的主张紧力.
规则
2
在对夹线构件进行一般调节的情况下,首先调节梭线夹线器 P 至低值,然后调节针线张紧力使之适配。
说明
2
对于梭式针迹,在绕线过程中,梭芯线的低张紧力会受到绕线器可调预紧张力夹线 P 的影响。所以调节
绕线器预紧张力夹线器 P 时,应使梭芯线以可能最低的张力匀称地绕线
3.3.2
线
-由“抬压脚”自动形
梭芯线
3.4
根据各机型,适用于各梭芯线的最大限定值见表 1.1
3.4.1
绕梭芯线 3
抽出梭芯线
-穿过线盘架
-从左侧通过过线 U 的后孔,
-按顺时针方向夹入可调节梭芯绕线器预张紧夹线器 U 之间
-从右后侧通过过线 U 的后孔
-从左侧通过过线 U 的中孔,
-从右侧通过过线 U 的前孔,
-逆时针在梭 T 上绕若干圈
-露出多余线头并由割线刀割去。
-推开绕线器满线板 M, 线器自动停止。
-拉出梭芯线放入割刀切线。
绕线器预张紧夹线器 U 应设定得较低使线在低张力下有规律地绕线。
在过大的预张紧力下绕线时,铝梭 T 可能会分离并可能发生相当多剪线紊乱。
3.4.2
梭芯更
更换梭芯时,
-把挑线杆提升到最高位置,
-向上扳动扳 B(使压脚停在上面位置)
-打开锁扣并从旋梭中取出梭壳,
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 267 - 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 267 - 2016 in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info