634038
6
Zoom out
Zoom in
Previous page
1/17
Next page
FOR SAFE OPERATION
1.Don't put your hand under the needle when you turn "on" the power switch or operate
the machine.
2.Don't put your hand into the thread take-up cover while the machine is running.
3.Turn the power switch before tilting the machine head or removing the belt cover
and the V belt.
4.Never bring your fingers, hair or clothing close to, or place anything on the handwheel,
V-belt, bobbin winder wheel or motor during operation.
5.If your machine is provided with a belt cover, finger guard and safety plate, never
operate your machine with any of them removed.
6.The hook rotates at a high speed while the machine is in operation. To prevent possible
injury to hands, be sure to keep your hands away from the vicinity of the hook during
operation. In addition, be sure to turn the power to the machine when replacing
the bobbin.
7.When tilting the machine head, exercise care not to allow your fingers etc. to be caught
under the machine head.
8.Do not wipe the surface of the machine head with lacquer thinner.
9.Never operate the machine unless its oil pan has been filled with oil.
10.Don't use a motor pulley of a larger outside diameter than the standard outside diameter
for the first onemonth.
11. Confirm that the voltage and phase (single- or 3-phase) are correct by checking them
against the ratings shown on the motor nameplate.
12,In case of maintenance, inspection, or repair, be sure to turn the power switch
and confirm that the sewing machine and the motor have completely stopped before
starting the work. (In case of the clutch motor, it continues rotating for a while by the
inertia even after turning the power switch. So, be careful.)
OFF
OFF
OFF
OFF
CAUTION BEFORE OPERATION
WARNING:
To avoid malfunction and damage of the machine, confirm the following.
Clean the sewing machine thoroughly before using it for the first time.
Remove all dust collected on the sewing machine during the transportation.
Confirm that the voltage and phase are correct.
Confirm that the power plug is properly connected.
Never use the sewing machine in the state where the voltage type is different from the
designated one.
The direction of rotation of the sewing machine is counterclockwise as observed from
the handwheel side. Be careful not to rotate it in reverse direction.
II
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 251-140040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 251-140040 in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info