634020
21
Zoom out
Zoom in
Previous page
1/34
Next page
6.5 Adjusting the looper thread feeder (Cl. 175/176)
The looper thread feeder 1 guarantees the automatic adaptation of the
looper thread quantity to the set stitch length.
This means an optimum stitch formation for every stitch length, even
in case of condensed stitches. No gaping and ruffling of the seam.
The looper thread quantity to be pulled can be quickly adjusted.
Without changing the thread tensions you can realize:
a) tight
b) normal
c) highly elastic (balloon stitch)
seams
After loosening the screws 2 and adjusting the feeder 1 please make
the following settings:
Loosen screws 2.
Adjust the thread feeder:
towards 0 = tighter seam
towards 5 = more elastic seam
Important hints!
1) In case of an extreme adjustment, e.g. a very short s titch length and
a very large thread quantity (elastic seam) it has to be observed that a
safe needle penetration into the thread triangle is still possible. A too
large looper thread quantity may lead to skipped stitches.
2) If the stitch length is increased considerably with the settings
described under 1), e.g. to 4 mm, the t hread guide has to be reset
towards 0. Otherwise the looper thread might jump off the thread
pick-up disc. The looper thread would not be pulled back by the
thread pick-up disc as it is necessary during the retrograde motion of
the looper.
19
GB
a)
b)
c)
1
2
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 175 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 175 in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 175

Durkopp Adler 175 User Manual - German - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info