612052
53
Zoom out
Zoom in
Previous page
1/86
Next page
Operation
Operating manual 100-69 version 00.0 - 05/2013
51
Removing the stacked workpieces
1. Actuate the foot switch (6) and hold it down.
The stacked goods stand (4) is lowered.
2. Remove the stacked workpieces.
5.11.5 Roll-off device
The stacker extension is used in conjunction with the throw-over stacker.
The transport rollers (1) convey the workpiece into the stacker opening.
This is necessary for all workpieces positioned in transverse direction or
for those which are too short for being seized by the throw-over stacker
(e.g. when sewing linings of inside pockets).
The workpiece must have a minimum length of 200 mm from the middle
of the pocket opening to the left edge so that it can be safely seized by the
transport rollers (1).
The transport rollers (1) are driven via an electronically adjustable drive.
The roller speed and the on-time can be separately set to several grades
at the control panel of the control unit.
Activating and switching on the stacker extension
Activate the roll-off device at the control panel in the menu item
“Seam parameters”, Programming Instructions. The parameter
indicates to the control unit that the sewing unit is equipped with a
roll-off device.
Switch on the throw-over stacker and the stacker extension in the
menu "Seam parameters", Programming Instructions.
Material damage!
During the rolling-off the solenoid valves have a dual function.
Stacker switched on: Roll-off device serves as stacker extension
Stacker switched off: Roll-off device serves as ejector
ATTENTION
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 100-69 Beisler at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 100-69 Beisler in the language / languages: English as an attachment in your email.

The manual is 6,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 100-69 Beisler

Durkopp Adler 100-69 Beisler User Manual - German - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info