612052
33
Zoom out
Zoom in
Previous page
1/86
Next page
Operation
Operating manual 100-69 version 00.0 - 05/2013
31
5.4.2 Changing the needles
Fig. 14: Changing the needles
1. Swing the folding station aside, chapter 5.2.
The needles are freely accessible.
2. Loosen screw (2) and remove the needle from the needle holder (1).
3. Push the new needle into the drill-hole of the needle holder (1) as far
as it will go.
Seen from the operator’s side the scarf (4) of the left needle must point
to the left and the scarf (5) of the right needle must point to the right (see
sketch).
4. Tighten screw (2).
Risk of injuries from cuts and stitches!
Turn the main switch off.
Change the needles only with the main switch
switched off.
Do not reach into the area of the centre knife (3)
when changing the needles.
WARNING
Material damage!
After changing to another needle size the needle protection on the
hook has to be readjusted, Service Instructions.
ATTENTION
(1) - Needle holder
(2) - Screw
(3) - Center knife
(4) - Needle scarf left needle
(5) - Needle scarf right needle
ཱིི
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 100-69 Beisler at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 100-69 Beisler in the language / languages: English as an attachment in your email.

The manual is 6,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 100-69 Beisler

Durkopp Adler 100-69 Beisler User Manual - German - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info