35289
2
Zoom out
Zoom in
Previous page
1/2
Next page
- 1 -
- 2 -
- 3 -
- 5 -
- 6 -
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit
into your outlet , consult an electrician for replacement of the obsolete
outlet.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG
WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
WARNING
- 4 -
- 7 - - 8 -
The lightning flash with
arrowhead symbol,
within an equilateral
triangle, is intended to
alert the user to the
presence of uninsulated
"dangerous voltage"
within the product's
enclosure that may be
of sufficient magnitude
to constitute a risk of
electric shock to
persons.
WARNING: TO REDUCE
THE RISK OF
ELECTRIC SHOCK, DO
NOT REMOVE COVER
(OR BACK) NO USER-
SERVICEABLE PARTS
INSIDE. REFER
SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
The exclamation point
within an equilateral
triangle is intended to
alert the user to the
presence of important
operating and
maintenance (servicing)
instructions in the
literature accompanying
the appliance.
Protect the power cord from being walked on or pinch particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightening storms or when unused for long
periods of time.
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been exposed to rain or moisture,
does not operate normally, or has been dropped.
This appliance shall not be exposed to dripping or splashing water and
that no object filled with liquid such as vases shall be placed on the
apparatus.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
CLASS 1
LASER
PRODUCT
CAUTION
INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCKS DEFEATED.
AVOID EXPOSURE TO BEAM.
This product contains a
low power laser device.
PRECAUTIONS
Follow the advice below for safe and appropriate operations.
ON PLACEMENT
· Do not use the unit in places which are extremely hot ,clod ,dusty, or humid.
· Place the unit on a flat and even surface.
· Do not restrict the air flow of the unit by placing it in a place with poor air flow,
by covering it with a cloth, or by placing it on a carpet.
ON SAFETY
· When connecting and disconnecting the AC cord, grip the plug and not the
cord itself. Pulling the cord may damage it and create a hazard.
· When you are not going to use the unit for a long period of time, disconnect
the AC power cord.
ON CONDENSATION
· When left in a heated room where it is warm and damp, water droplets or
condensation may form inside the CD player.
· When there is condensation inside the unit, the unit may not function normally.
· Let it stand for 1 to 2 hours before turning the power on , or gradually heat the
room up and dry the unit before use.
FCC INFORMATION (For USA only)
This device complies with Part 15 of FCC Rules. Operations are subject to the
following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference
that may cause undesirable operations.
Should any trouble occur, disconnect the AC power cord and refer
servicing to qualified personnel.
1)
2)
SYSTEM CONNECTIONS
1
. SPEAKERS CONNECTING
Connect the wires to the speaker terminals in correct position.
Note: Connecting speakers other than the speakers supplied with the
unit, may damage the unit.
2
. AC POWER CONNECTING
Before use, check that the rated voltage of your unit matches your local
voltage. Make sure both speakers are connected correctly before plugging
the AC power cord into an AC outlet.
Caution: To prevent electrical shock, wide blade of plug to wide slot,
fully insert . (For USA and Canada)
To an AC outlet
PARTS OF LOCATION
CD door
REPEAT/ SKIP/SEARCH
buttons
POWER/STANDBY indicator
REPEAT indicators
(ONE SONG/ONE DISC/ALL DISC)
DISC SKIP button
CD PLAY indicator
FM STEREO indicator
PHONES jack
FM MODE/BEAT CUT selector
(FM STEREO/FM MONO)
FUNCTION selector
(STANDBY/TAPE/TUNER/CD)
Cassette operation controls
Cassette compartment
BAND selector (AM/FM)
VOLUME control
Dial scale
Tuning control
Remote sensor
CD STOP /PLAY/PAUSE
buttons
CD display
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
REC (record) button
PLAY button
REWIND button
F.FWD (fast forward) button
STOP/EJECT
button
PAUSE button
12.
13.
14.
15.
16.
17.
18.
19.
RADIO OPERATION
1. Slide the FUNCTION selector to
TUNER.
2. Slide the BAND selector to desired
band.
3. Tune into a station. 4. Adjust the volume level.
FOR BETTER RECEPTION
NOTE: DO NOT CONNECT TO AN OUTSIDE ANTENNA.
Fully unwind the wire antenna. Then
extend the wire antenna and place
it in the position that sounds best.
Rotate the unit to get the best
receiving position.
TO RECEIVE THE FM BROADCAST IN STEREO
Slide the FM MODE selector to FM STEREO.
When the FM stereo broadcast is received. FM STEREO indicator lights up.
IF THE FM BROADCAST SIGNAL IS WEAK
Slide the FM MODE selector to MONO position to turn off the FM STEREO
indicator and background noises become monaural.
AFTER LISTENING
Slide the FUNCTION selector to STANDBY.
COMPACT DISC PLAYBACK
1. Slide the FUNCTION selector to
CD.
2. Open the disc compartment.
3. Place a disc onto the disc(s) holder,
with the label side up.
Caution: The unit can play 5 inch
(12cm) only.
Press the DISC SKIP button to
revolve the tray clockwise.
Place other disc(s) on the disc
holder(s).
4.
5. Close the CD door by holding down on its center until secure. The total
number of tracks will show in the CD display for a few seconds.
To stop playing:
(a) For a moment only, press PLAY/PAUSE button and the track no. will
flash. Press this button again to resume playing.
(b) Press the STOP button.
Note:
The SKIP/SEARCH buttons can only be used to choose a track
of the current disc.
To choose a track of another disc, DISC SKIP button should be pressed
to get to the desired disc first.
LOCATING A PARTICULAR POINT IN A TRACK
To locate a track in sequence
· To locate the beginning of the current or the preceding track, press
reverse skip button.
· To locate the beginning of the succeeding track, press forward skip
button.
· A short period of time will be needed for the disc to read the information of
the desired track before playback can be done.
6. Press the DISC SKIP button to select the desired disc. Press either one of
the
SKIP/SEARCH
buttons to select the desired track.
7. Press the PLAY/PAUSE button to start playback . The CD PLAY indicator
lights up.
REVERSE FORWARD
Press it once
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durabrand CD2155 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durabrand CD2155 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info