651051

Dunavox DAB-89.215DB Manual

9
Zoom out
Zoom in
Previous page
1/19
Next page
Code Rev. D 20140818 (IEC)
9
lock on the door) and relocate the door to the
designated position. Then screw the bottom
hinge assembly on the left designated position
and tighten it after the door is leveled.
9. Transfer the handles & plugs to the opposite
positions and then reassembly the ventilation
grilles if need.
DESIGN 2 – For fully integrated models
1. Remove the glass door by unscrewing the eight
lock screws
○
,3 and
○
,4. Be careful to hold
the glass door firmly after removing the screws
and place it on a padded surface to avoid the
risk of damage.
2. Unscrew and transfer the door supporter
○
,2
to the opposite side.
3. Rotate the glass door 180°and refit the glass
door to the opposite side. Then screw and
tighten it after the door is leveled.
DESIGN 3 – For tall models
1
2
5
6
10
1
5
3
4
1. Remove the bottom hinge
○
,1 by unscrewing
the four lock screws
○
,2. Be careful to hold the
glass door firmly after removing the screws. (Fig.
1)
2. Gently pull down to remove the glass door from
the right top hinge and place it on a padded
surface to avoid the risk of damage. Then
remove the right top hinge
○
,9. (Fig. 4)
3. Pop out the cover caps on the left side of
cabinet and use them to cover the screw holes
on the right hand side.
4. Screw the alternative left top hinge
○
,8 ,
included in the fittings, on the left hand side of
cabinet. (Fig. 4)
5. Unscrew and transfer door supporter
○
,10 to
the opposite side. At the same time remove the
stopper pin
○
,7 of bottom hinge to the opposite
designated position or unscrew and transfer the
hinge pin
○
,7a of bottom hinge to the opposite
designated position. (Fig. 5 & 3)
6. Unscrew and transfer the door adapter
○
,5
and lock catch
○
,4 to the top designated
position of glass door. (Fig. 2)
7. Rotate the door 180° and relocate the glass door
to the designated position. Then screw the
bottom hinge on the left designated position and
tighten it. (Fig. 5)
8. Recheck and adjust the door alignment by
loosening the screws
○
,6and moving the door
adapter
○
,5. Tighten the screws
○
,6 after the
door is levelled. (Fig. 5)
DESIGN 4 – For double door models
1
2
8
9
4
5
6
7
3
3
1. Remove the bottom hinge
○
,1 by unscrewing
the four screws
○
,2. Be careful to hold the
lower glass door
○
,3 firmly after removing the
screws. And then gently pull down to remove
the lower glass door from the middle hinge and
place it on a padded surface to avoid the risk of
damage. (Fig. 1)
2. Unscrew and transfer the door adapter
○
,4
and
○
,7 to the designated opposite position of
lower glass door. (Fig. 2)
3. Remove the door adapter
○
,14 by unscrewing
the two lock screws
○
,13. Be careful to hold
the upper glass door firmly after removing the
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dunavox DAB-89.215DB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dunavox DAB-89.215DB in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info