783576
6
Zoom out
Zoom in
Previous page
1/11
Next page
10 11
8 9
Plug in the Power Cord at
the mains.
Turn the Control Dial to the
function that you wish to use.
The Power Indicator Light will
illuminate. (see table below).
7
Place the Lid into position.
Caution: Failure to
locate lid will prevent
sterilisation. Risk of
bacterial and viral
contamination.
FUNCTION DESCRIPTION TIME
Sterilise and
Quick Dry
Sterilise and dry up to 6 bottles in 30 minutes. This function
kills 99.9% of bacteria. Ideal for immediate use. Items may not
be completely dry.
Note: This function requires 90ml of water; more
than 90ml of water will prolong the sterilisation cycle
time, reducing the drying time. Less than 90ml may
not sterilise items properly. If you leave the lid on
your Steriliser, item will remain sterile for 24 hours.
30 minutes
Sterilise and
Dry
Sterilise and dry up to 6 bottles in 60 minutes. This function
kills 99.9% of bacteria. Items will be completely dry and ready
to use or store for later use.
Note: This function requires 90ml of water; more
than 90ml of water will prolong the sterilisation cycle
time, reducing the drying time. Less than 90ml may
not sterilise items properly. If you leave the lid on
your Steriliser, item will remain sterile for 24 hours.
60 minutes
Dry Only Dry up to 6 bottles in 30 minutes by ensuring the water recess
is empty and turning the control dial to Sterilize and Quick
Dry. Without water this function will dry items that have been
sterilised only and are still wet, or dry any items that require a
longer drying cycle.
30 minutes
FUNCTION DESCRIPTION TIME
Sterilise Only Sterilise up to 6 full bottles. This function kills 99.9% of
bacteria. Note: This function requires 90ml of
water; more than 90ml of water will prolong the
sterilisation cycle time, less than 90ml may not
sterilise items properly. If you leave the lid on your
Steriliser, item will remain sterile for 24 hours.
15 minutes
5 6
Put the Upper Rack into
position on top of the
Lower Rack.
Place the bottle teats,
collars and accessories on
the Upper Rack. Ensure
teats face upwards, so that
they do not collect water /
condensation.
When the cycle has nished, the
Control Dial will be in the ‘O’
position and the Power Indicator
Light will NOT be illuminated. If
light remains illuminated after
use immediately isolate the
Steriliser & call service centre. Unplug the Steriliser from
the mains.
Caution: After the
Power Indicator Light
has gone out wait 5
minutes before opening
the lid. Caution: The
Steriliser will be hot.
10
11
Wash hands for 20 seconds with soap. Remove the milk
bottles and other items carefully from the Upper and Lower
Racks. Caution: The sterilised items may still be hot.
We recommend that you use tongs to handle the
sterilised items.
12
Warning: Allow
10 minutes before
starting another cycle.
Warning: Do not place items in the Water
Recess or on the Element; risk of re. Only place
items to be sterilised on the racks provided.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dualit Steam Steriliser at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dualit Steam Steriliser in the language / languages: English as an attachment in your email.

The manual is 4.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info