783564
12
Zoom out
Zoom in
Previous page
1/19
Next page
22 23
CLEANING – MONTHLY
BEFORE CLEANING, ENSURE THAT THE APPLIANCE IS
SWITCHED OFF, UNPLUGGED AND ALLOWED TO COOL.
Risk of electric shock and scalding. Do not wash any of the
plastic accessories or Filter Holder in the dishwasher.
*If you have trouble removing the Nozzle, call Customer Services
on 01293 652500. Use a pin to ensure that the Steam Nozzle is not
blocked.
1 2
4
3
5
Wipe the entire Brewhead
area and external surfaces
to ensure it is completely
free of coffee grounds. Fine
coffee grounds can block the
Shower Head.
Using a screwdriver and
hammer, gently tap the
screw to dislodge any
dried coffee. Then unscrew
clockwise (when viewed
from above).
Use a pin to clear holes and
grooves, and clean with a
soft brush. Dry, then use a
screwdriver to reinstall the
Showerhead.
Ensure that the Froth
Nozzle is cool before
cleaning. Pull the Froth
Nozzle off the Steam Wand
and wash under running
water to remove any milk
residue. Risk of burns.
UNSCREW
FILTER BASKET
CLEAN
BREWHEAD
RINSE FROTH
NOZZLE
WIPE BREWHEAD
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
S
W
I
T
C
H
O
F
F
&
Unscrew using a Philips ph2
screwdriver to separate
Filter Basket components.
Use a pin to clear holes and
grooves, and clean with a
soft brush. Dry, then carefully
reassemble. Note: Do not
overtighten the components
during reassembly
6
Unscrew Steam Nozzle in a
clockwise direction (when
viewed from above) to
remove from the Steam
Wand. Do not apply
excessive force. *
UNSCREW
97
10
8
Reinstall the Steam Wand
Handle by aligning the
Steam Wand Handle with
the Steam Wand and
pushing it upwards. Note:
the Steam Wand Handle is
tightly tted and may need
extra attention and time to
attach.
Support the Steam Wand
then pull the Steam Wand
Handle down to remove.
Note: Steam Wand Handle
is tightly tted and may need
extra time and attention to
remove. Clean Steam Wand
Handle with detergent and a
cleaning brush.
Reinstall Steam Nozzle by
screwing it anticlockwise
into the Steam Wand (when
viewed from above). Then
push the Froth Nozzle
upwards onto the Steam
Wand to install.
Use a pin to remove dried
milk from inside the Steam
Wand.
CLEAN STEAM
WAND HANDLE
REINSTALL
STEAM/FROTH
NOZZLE
CLEAN THE
STEAM WAND
REINSTALL STEAM
WAND HANDLE
11 12
IMPORTANT NOTICE:
Turn on your machine.
Flush the Steam Wand by
dispensing water, this will
remove any milk residue
from inside the Steam Wand
and prevent blockages. Risk
of scalding.
Empty and rinse the Water
Tank and rell with fresh
water.
WATER TANK FLUSH STEAM
WAND
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dualit Espresso Coffee Machine at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dualit Espresso Coffee Machine in the language / languages: English as an attachment in your email.

The manual is 7.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info