783567
7
Zoom out
Zoom in
Previous page
1/21
Next page
12 13
SETTING UP - CONTINUED
1
Remove Internal Drip
Tray by pulling on the
handle. Check that the
Grounds Container is in
place.
2 3
Install the Internal Drip Tray
into the machine. The front
of the Drip Tray must be
ush with the machine, if it
is not, there is likely to be an
obstruction.
Press on the bottom of the
Service Door to raise its
top edge. Pull on the top
edge to remove the Service
Door.
Remove the Infuser by
pressing both the orange
buttons inwards.
Note: The Warning
Light will turn on when the
infuser is removed.
4REMOVE INFUSER
CHECK GROUNDS
CONTAINER
REMOVE SERVICE
DOOR
INTERNAL DRIP
TRAY INSTALL
Push the Infuser into the Infuser
Support. Ensure that both
of the orange clips engage.
There will be an audible click
once engaged correctly. The
Warning Light will show if
the Infuser is installed incorrectly.
7
Align the Service Door’s two
metal pins into the slots of
the appliance body. Once
aligned, push the Service
Door into place.
9
Ensure the External Drip
Tray Cover is placed into
the External Drip Tray. Push
the External Drip Tray into
the cut-out at the front of
the machine. The tray will
secure itself with magnets.
Position in a safe space. This
must be away from heat
sources, water taps and not
in a cupboard. The surface
must be at in order to
keep the machine level and
stable.
Lift out the Water Tank using
the Handle. Rinse before lling
with fresh water. DO NOT
USE ANY OTHER LIQUID
Maximum ll level is the
MAX Marker. Do not
overll.
10 REMOVE AND FILL
WATER TANK
SERVICE DOOR
INSTALL
POSITION
Rinse Infuser with warm
water and dry afterwards.
DO NOT PLACE IN
DISHWASHER.
5RINSE INFUSER
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
S
W
I
T
C
H
O
F
F
&
8EXTERNAL DRIP
TRAY
6INFUSER INSTALL
SETTING UP
Ensure that your machine is unplugged and cool before starting. Remove all packaging and
protective lms from the Appliance, including the protective cover on the Control Panel, then
follow the next steps to ensure your machine is set up correctly. This process will help you
achieve optimum performance and will take approximately 15 minutes to complete. Note: The
Control Panel will not work with the protective cover in place.
IMPORTANT NOTICE:
PRODUCT FAILURE
DUE TO THE BUILD
UP OF LIMESCALE
IS NOT COVERED BY
GUARANTEE. Dualit
recommends descaling regularly,
in a well-ventilated area, to
prevent limescale build-up in the
machine. See Limescale Warning
on page 8 for frequency in your
area in accordance with the
hardness of your water. Dualit
recommends the use of an
OSCAR Water Softener Bag in
all areas. See page 8 for further
guidance. For more information,
visit our website dualit.com/
products/machine-care or
contact our Customer Services
on 01293 652500
Register your product at
dualit.com. This will only
take 60 seconds. You will
need the product model
and serial number that are
on the rating label on the
base of the product.
DON’T FORGET
TO REGISTER
YOUR PRODUCT
WWW. DUALIT.COM/REGISTER
OR BY POST
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dualit Bean to Go at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dualit Bean to Go in the language / languages: English as an attachment in your email.

The manual is 15.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info