783544
2
Zoom out
Zoom in
Previous page
1/2
Next page
KNOW YOUR KETTLE
SETTING UP
FILLING YOUR KETTLE
CLEANING & CARE
BOILING WATER
1
Place the kettle on the Power Base. Plug the kettle
into a power socket. Press the On/Off Switch down.
The Power Neon will illuminate and the kettle will
start to heat up. If the kettle is accidentally switched
on with no water inside, the boil-dry device will
switch off the heating element to prevent damage to
the kettle.
The kettle will automatically turn off after the
water has boiled and the neon light will go out.
To turn off before the water has boiled lift up
the On/Off Switch. DO NOT LEAVE THE
APPLIANCE UNATTENDED DURING
USE. UNPLUG AFTER EACH USE.
RISK OF FIRE IF AN UNATTENDED
APPLIANCE IS LEFT OPERATING OR
PLUGGED IN.
Remove kettle from the power base.
When lling or carrying the kettle, do not tilt
it backwards, as this may allow water to pass
through the steam tube onto the control area.
Should this happen, the kettle must be allowed to
dry before re-using. To avoid the risk of splashing,
once the kettle has boiled wait 10 seconds then
pour slowly. Do not over-tilt the kettle.
TURN ON 3POURING
2TURN OFF
WARNING: IF THE KETTLE HAS JUST BOILED, IT WILL BE FULL OF STEAM, WHICH WILL ESCAPE AS SOON AS
THE LID IS OPENED.
LID
STAINLESS STEEL BODY
POWER BASE
CORD TIDY
BODY PANEL
SPOUT
WATER FILTER
TOUCH PAD
LID PANEL
LID RELEASE
VIEWING WINDOW
POWER CORD
PLUG
ON/OFF SWITCH
STEAM TUBE
Register your appliance at
www.dualit.com. This will
only take 60 seconds. You will
need the product model and serial
numbers that are on the rating label
on the base of the product.
Ensure water lter is in place.
DO NOT OPERATE KETTLE
UNLESS THE WATER
FILTER IS CORRECTLY IN
POSITION.
Ensure that the kettle is
unplugged. Remove the kettle
from the Power Base. Open
the Lid by pressing the Lid
Release. CAUTION: WHEN
HEATING HOT STEAM
WILL BE EMITTED FROM
THE KETTLE. SCALDING
WILL OCCUR IF YOU ARE
WITHIN 400MM OF THE
LID OR SPOUT.
Place your kettle as close to
the wall socket as possible. DO
NOT STORE OR USE YOUR
KETTLE IN APPLIANCE
GARAGE OR UNDER
CUPBOARDS. RISK OF FIRE.
REGISTER MY
APPLIANCE
WATER FILTER
OPEN LID
CORD TIDY DO NOT...POSITION
Use the shortest cord possible.
Wrap excess cord around the
Cord Tidy under the Power Base.
Filll the kettle through the Lid
opening. Use at least one cup of
water (250ml). The water level
must stay below the Max Mark
Indicator. Save energy by only
heating what you require.
Keep kettle upright and level
at all times when lling. Do
not tilt kettle backwards. DO
NOT OVERFILL OR FILL
THROUGH THE SPOUT.
RISK OF SCALDING.
Do not operate on an inclined plane.
Do not operate in a tray.
CAUTION
when lling
to ensure
water does
not go
down the
Steam Tube,
preventing
the kettle
from correct
operation.
Push the Lid
down using the
Touch Pad to
close. Check that
it is fully in place,
otherwise the
kettle may not
switch off when
boiling.
DON’T FORGET
TO REGISTER
YOUR PRODUCT
WWW. DUALIT.COM/REGISTER
OR BY POST
2 3
2
4
3 4
1
5
1
WARNING: IF THE KETTLE HAS JUST BOILED IT WILL BE FULL OF STEAM THAT WILL
ESCAPE AS SOON AS THE LID IS OPENED. THE LID WILL BE HOT. RISK OF SCALDING.
FILLING
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
P
L
U
G
I
N
B
E
F
O
R
E
U
S
E
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
P
L
U
G
I
N
B
E
F
O
R
E
U
S
E
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
P
L
U
G
I
N
B
E
F
O
R
E
U
S
E
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
P
L
U
G
I
N
B
E
F
O
R
E
U
S
E
WATER
HARDNESS
Hardness
level
CaCO3 mg/l 0-100 101-200 201+
ACTION
FREQUENCY
Descale
At least once every
4 months or every
200 cycles.
At least every 2
months or every
100 cycles.
At least once per
month or every
50 cycles.
LIMESCALE BUILD UP
It is important to regularly descale
your kettle to prevent limescale
building up over time. This build up
can cause damage to your kettle
and alter the way your hot drinks
taste. Follow these steps to minimise
limescale build up in your kettle:
Empty the kettle after each use;
do not leave water in the kettle
overnight. Use ltered water instead
of tap water. Avoid using bottled
water as this is classed as hard water.
LIMESCALE WARNING!
BRITISH ISLES
& IRELAND
WATER
HARDNESS
MAP
DESCALE REGULARLY
Dualit recommends descaling regularly; at least once every
2 months. If you live in a hard water area you may need
to descale more often. See our Water Hardness map to
determine how often you should descale your kettle. Dualit
recommends Kilrock K Multi-Purpose Descaler. This can be
purchased from www.dualit.com. Other descalers can be used;
follow the instructions on the packaging. When descaling has
nished empty the kettle and rinse it out a minimum of 3
times with fresh water. Rell with fresh water, boil, then
discard the boiled water. FAILURE TO DO SO CAN
CAUSE INJURY. DO NOT HEAT KETTLE
WITH DESCALING SOLUTION IN IT.
Soft Medium Hard
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
P
L
U
G
I
N
B
E
F
O
R
E
U
S
E
Before cleaning make sure the
appliance is switched off, unplugged
and allowed to cool. Remove
kettle from the Power Base. Wipe
the outside and inside surfaces
with a damp cloth. Ensure that all
connectors and sockets are kept
dry. Do not immerse the Body,
Power Base, Power Cord or
Plug into water or other liquid.
Risk of electric shock and re.
Do not use sharp, abrasive
or aggressive cleaning agents,
bleach or scouring pads to
clean the appliance. The use of
such cleaning implements may
affect the life of the appliance.
Make sure the appliance is switched
off, unplugged and allowed to cool.
Open the Lid. Hold the top of the
Water Filter, pull up and out of
the kettle. Rinse under a tap whilst
brushing carefully with a soft brush.
Rinse out the kettle with fresh
water. To replace align the Water
Filter with the grooves in the Filter
Holder, insert and push back into
place. Do not operate kettle
unless water lter is correctly
in position. Risk of scalding and
injury caused by misuse.
THE BODY WATER FILTER
12
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dualit Architect Kettle at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dualit Architect Kettle in the language / languages: English as an attachment in your email.

The manual is 1.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dualit Architect Kettle

Dualit Architect Kettle Additional guide - English - 1 pages

Dualit Architect Kettle User Manual - German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 6 pages

Dualit Architect Kettle Additional guide - All languages - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info