380487
22
Zoom out
Zoom in
Previous page
1/24
Next page
ENSURE THE PROCESSOR IS UNPLUGGED WHILST IN
STORAGE, WITH THE LID UNLOCKED. THOROUGHLY
CLEAN AND DRY YOUR PROCESSOR AND ALL
ATTACHMENTS FOLLOWING THE CLEANING
INSTRUCTIONS ON P 21. CHECK THE CONTROL KNOB
IS IN THE OFF POSITION BEFORE STORING. KEEP THE
TOOLBOX OUT OF REACH OF CHILDREN.
Dismantle the processor, clean and dry all parts
Store the: bowls, drive shaft, small blade and lid with
food pusher assembled on the processor body
Do not lock the bowl lid whilst in storage. This can
damage the safety mechanism built into the bowl
The large and medium blades, spatula and all discs
should be stored in the toolbox provided or in the
same manner you would store sharp knives. The
chipping disc will only fit in the second disc slot as
shown below
Keep out of direct sunlight whist in storage.
What do I do if my processor won’t turn on?
Check the plug is correctly fitted in the outlet and
the power supply is switch on
Check the power cord is securely attached to the
back of the processor
Check the fuse in the plug. Ensure the new fuse
is the same current value as original
Ensure the bowl and lid are locked in position
Check that the small bowl has properly located onto
the medium bowl. If not the lid will not locate
properly and the processor will not turn on.
What if it switches itself off while I’m using it?
The motor may have overheated. To prevent
damage, the unit will automatically cut all power. If
this happens: Turn switch to off, unplug and allow
the unit to cool for approximately 1 hour. Once
cool the overheat safety feature will reset and you
can carry on using the processor
Check the lid or bowl has not become lose.
What if it doesn’t chop uniformly?
Blades or discs may not be attached properly
You may be exerting too much force on the food
while pushing down the feeder tube.
What if my egg whites won’t stiffen up?
You may not be using enough eggs (we recommend
a minimum of two eggs)
You may be using the wrong accessory; for egg
whites you need the e-disc and the large bowl
You may not be whisking for long enough
Your bowl must be completely dry.
22
Grating &
Shaving discs
Chiping
disc
Adjustable
slicing disc
Medium
Blade
Spatula
Large
Blade
E-Disc
Dough
Blade
CLEANING AND CARE
STORAGE
TROUBLESHOOTING
2007.07.24_Food processor manual.qxp 25/07/2007 09:12 Page 22
Downloaded from www.Manualslib.com manuals search engine
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dualit 88600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dualit 88600 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info